|  ReSeed | Open source project based on the original Solder's schematics and some photos of the actual hardware, but with modern electronic components and chipsets. It comes out as a PCB board only, where any single user can mount ad hoc all the needed electronic components, mainly choosing if his own card must support either the 6581 or the 8580 SID chip's model.
This new interpretation of the classic Solder's SID Card comes with a volume control apart of the general one for the DigiFix, the output switch removed due to automatic redirecting, a single stage only amplifier in order to reduce the general output noise, decoupling capacitors added for each IC, recalculated values for the step-up converter in order to make the generated voltage less noisy and as ripple-free as possible. |
| |
| | ReSeed 6581 | 
First real working ReSeed board ever. Build up by the author himself, mounting a SID 6581. Requested and finally owned by Luca. |
| |
| | ReSeed Render | 
Rendered image of the board's final V1 development. |
| |
| | Boards | 
[ Large image ]
First produced and distributed bunch of boards, purchased by Mike "indi" Dailly. |
| |
| | First Batch | 
First batch of finished ReSeed cards. |
| |
| | Version 1.1 Top | 
Same as V1 except for changes in the value of a few components which dramatically reduce the output noise. |
| |
| | Version 2 8580 Top | 
Version 2's most notable difference is the addong of two ferrites covered with insulating tape. |
| |
Copyright © Plus/4 World Team, 2001-2024. Support Plus/4 World on Patreon |
![[ Large image ]](/images/hardware/reseed_pack_large.jpg){kind=link}