Posted By
MMS
on 2005-11-06
16:15:30
 |  Re: MCI or IFLI are possible on Plus/4?
Hi, a correction
I did not finished the MCI description:
"Multi Color Interlace generates 320*200 pixel resolution.
You can use 4 colors in each 8*8 points big attribute cell. This mode also gives the possibility of mixing two colors together, so there are 4 of theoretical amount of 128 colors.
This mode uses two MultiColor pictures (160*200/4 colors in 4*8 cell), each using its own attributes (except the color RAM at $d800, which is shared by both).
These two MultiColor pictures alternates each frame, but one of them is shifted one point to the side. This causes visible effect of jerky movement from side to side. Fortunately, it also improves the fineness of C64 MultiColor mode, and gives painter larger color palette."
|
