Posted By
SVS
on 2024-02-22
05:16:39
 |  Re: hannes ram im yape.
With Hannes/Solder expansion you can switch between 4 memory banks (64K each), but you cannot use more than one at time. To pass from a bank to another you have to use the BANK command (if OS92 was loaded) or to poke $FD16 with the bank value (0...3) . You can OR with 8 to obtain that the area $0...$3FFF does remain common despite the bank changing.
The above means that if you don't have a proper written program (for examples: SVS MEGA ASSEMBLER or SUMMER GAMES), you just can switch between the banks before to run it, but you'll work with standard 64K RAM.
|
