Posted By
Andras78
on 2009-09-02
03:06:07
|  Re: Converting .tap to cassette.
So, some days ago I've tried to record and convert my old cassettes and start of my favorite one: "Időlabirintus" 
Not necesseary to introduce it, really fun
The project was start with get a cable with two Jack. One of these is going into my Out line and the other one is to my HiFi (I know it is not so practical, but it was success...)
Gaia is reccomended a record setting:
Gaia said:
"
1) high pass filter~100 Hz
2) low pass filter ~5000 Hz
3) Amplify with clipping (probably most important)
" (oh, and try MONO, 44100Hz <-- it is fine as opposed others opinion )
It should be working fine, I sent my recorded 'wav' file to Gaia and he did the same filtering tried with Yape. This was almost success, the Header of the file was found by the Yape, (Loading...Found Idolabirintus...), but the recorded sample was not so clear.
Unfortunatelly I did not tried another recording, it is waiting when I have a little bit more time to try it again. It is really demand more patience and time
I do not know how is your status, but please let me inform if it is help or not, I really like this to do
Hopefully it is help a little bit
A
ps.: this could be help too: http://www.javalemmings.com/minus4/tape.htm
|
