Posted By
Chicken
on 2009-09-01
12:38:56
 |  Re: Converting .tap to cassette.
Hello and welcome 
Do you have some other (old) tapes that load fine with the very same datasette? Misalignment is a very common problem.
If other tapes load perfectly...
Then, what kind of cassette recorder have you used? Some ppl reported that it was easier to produce working tapes with MONO cassette recorders.
If you have a stereo one and the balance is adjustable, you could try just recording on one channel. Depending on the cable you use, instead of adjusting the balance you could also disconnect the left/right channel. Even if the .wav is mono and both channels should be the same, stereo recording might produce some echoing.
|
