========================================
Teleterm version 1.00
COPYRIGHT (C) 1989, Howard Lew
Shareware! If you use this program,
please send $25 or whatever
contribution you can afford to:
Howard Lew
2034 30TH Ave
San Francisco, CA 94116
========================================
IMPORTANT INFORMATION
This program is provided "as is" without
any warranty of any kind. I will not be
responsible for errors, ommissions, or
inaccurracies mentioned in this text
file. I will not be liable for any
damages resulting from the use of this
software. The entire risk as to the
quality and performance of this program
is with the user.
This program may not be sold or included
with the sale of any other product
without my permission. Permission is
granted to distribute and use unmodified
copies of this version of the program.
========================================
REQUIRED FILES
You should have these 3 files:
BLKS NAME PURPOSE
---- --------------- ----------------
14 "TELETERM BOOT" - the boot program
90 "-TELETERM" - object code
15 "TELETERM.TXT" - this text file
If the 3 files are not named as listed
above, rename them to those listed above
to run the program.
========================================
SPECIFICATIONS
Baud Rates: 300 & 1200
Buffer Size: 24000 byte capacity
Display: 40 & 80 columns
Drive Support: 1541 & 1571
Emulation: ASCII and C64 cg(99%)
Phonebook Size: 40 entry capacity
Protocols: Punter, Xmodem CRC
Xmodem checksum,
Straight
Note: The protocol Straight has no error
checking. It sends data directly from
disk to modem.
========================================
PROGRAM INFORMATION
To load the program
type: load"teleterm boot",8
and press
Now type: run
and press
Make sure your modem works with the
Plus/4. Not all Hayes compatibles work
properly. The Avatex 1200hc works
nicely. The carrier detect signal
should be forced on for most modems.
In terminal mode, you can exit to the
main menu by pressing HELP. In 80
columns, you can eliminate the
flickering that occurs on some Plus/4s
by toggling off the status line. To do
this, press F1.
The modem initiation is the usual Hayes
AT command, except that the two letters,
AT, are left out. Use this to change
default options not in the menu (for
example, modem speaker, auto-answer,
etc...) See your modem's users manual
for more information.
To start a file transfer, remember to
press the SPACEBAR after entering the
filename and choosing the correct
settings.
To redial, press SPACEBAR, or the
terminal will do that automatically if
you have both the correct modem settings
and a compatible modem. In the dialing
menu, press RETURN to enter 40 column
terminal mode. ESCape aborts.
That is all the essential information.
I have not done extensive testing, so
please report any bugs either on the CBM
echo or by mail. Please support the
shareware concept. I would like to
write more Plus/4 software, but $$$
is a big problem for college students.
Look for updates (depending on
contributions) on some San Francisco
bbses. User validation may be required.
(415) 621-8425 ET-SCRIBER BBS
(415) 441-0616 Transporter BBS
Well, enjoy the program. I hope you
find it useful.
Howard Lew
|
