Posted By
Lacus
on 2022-02-14
11:30:04
|  Re: Captured King Size Volume 1 and 2 tapes with MTAP and TAPSERV but the programs will not load
First of all, be sure that head of dataset is adjusted properly (if you can load the content of casette into plus/4 without problem, it should be OK.)
Second, try to use mtap -b 10 -h -c16pal output.tap command if it is recorded by turbo or any copy protection (if not, do not use -h), I have never used -xe or -x or -xa for plus/4
Do you use X1531 cable? (https://sta.c64.org/x1531.html)
I recommend to capture only one or two program as first step. If it works well, than your setup should be OK and you can capture the whole cassette.
|
