Posted By
Jácint
on 2019-10-13
03:18:06
|  Re: C16 Expansion Port to User Port
@MMS PCI socket I tried, not good! There is a slight difference between the expansion port and the pci socket. I recommend soldering the wires between the expport TO userport PCB and another expport connector.
@gerliczer PLA can replace GAL, but I can't program GAL.
@MCes A resistor and capacitor can be installed on the PCB if required. Redesigned! PLA can replace GAL, but I can't program GAL.
@C16Terminal This is USERPORT on the Plus/4 computer. Old Programs Plus/4 also works on C16.
@siz Replace the rectifier and capacitor in the power supply!
|
