Posted By
MMS
on 2019-06-17
14:44:56
 |  Re: how lowering temperature for TED CPU chips
Correct, it is the usual way
On the other hand I learn on my own hard way, that eg. DELL XPS210 fan with the eject method was much less efficient than the push method. As a result, my C2D E8500 always hanged due to overheat, tilll I reversed the airflow. It reduced the CPU temp by 6-8°C, though theoretically the same amount of air went through the heatsink.
The CPU was the hottest point in the PC
When the warmer air (already heated up by the northbridge and VGA card, not to mention the PSU) passed the heatsink it was certainly less efficient, than if the cool air pass though the same (despite as cubic m3/min was the same amount (no fan change is possible, special Dell connector). )
In this case the hot guy is the 8501, and will get a direct and cool airblow, and according to my experience, it should be just fine (or even more efficient) as will push out the hot air from the complete housing.
|
