Login
Back to forumReply to this topicGo to last reply

Posted By

Papa_Bear
on 2016-11-13
17:20:16
 SD2IEC

Think this SD2IEC would work for the Plussy if I picked up a joystick adapater?

http://www.ebay.com/itm/SD2IEC-SD-Card-Reader-for-Commodore-64-128-VIC-20-1541-Drive-Emulator-C64-C128-/122168054775?hash=item1c71c893f7:g:On4AAOSwo4pYDjR7

Posted By

JamesD
on 2016-11-13
20:33:21
 Re: SD2IEC

Has anyone tested what drawing power off of the joystick ports will do to the Plus/4?
SD2IEC drives don't draw a lot of power, so I think it would be ok... but I'm not sure I'd want to be the first person to test it. The TED isn't exactly known for durability.

Posted By

Papa_Bear
on 2016-11-13
20:59:53
 Re: SD2IEC

the other SD2IEC goes of the cassette deck... so we'd need another adapter for that

Posted By

siz
on 2016-11-14
04:14:05
 Re: SD2IEC

I would recommend the tape port powered one. That one is designed to power an external device. And you can always cut down the C64 tape connector and replace it with an 8-pin mini-DIN.

Posted By

Papa_Bear
on 2016-11-14
08:23:35
 Re: SD2IEC

I already bought the Joystick one... but what if. I plugged it into the 64 while I played the plussy

Posted By

siz
on 2016-11-14
14:44:26
 Re: SD2IEC

The plus/4 joystick port also has the +5V so with a joystick port adapter it should work too. The +5V is not even connected to TED so it should be safe. It's just my gut feeling that I would prefer the tape port one.
But most probably the joystick port powered version should work fine too.



Back to topReply to this topic


Copyright © Plus/4 World Team, 2001-2024. Support Plus/4 World on Patreon