Login
Back to forumReply to this topicGo to last reply

Posted By

MMS
on 2016-06-21
18:30:33
 C64 User port expander: may it work with Plussy?

Dear HW gurus!
There is an ebay part, I found really interesting Scanntronic part for my future projects, just found it by accident 10 minutes before. This is a C64 User port multiplier, and as I see no switch, probably all three can work at the same time (up to the User port amper limitation, I suppose)

As the VCC and GND are at the same place on the C64 and Plus/4 User ports (and I find mor and more similarities), do you think, this user port multiplexer may work with Plus/4 too without damaging anything?
Or if not, why not? grin

I have less than 1 day to decide. Please help me, and many thanks in advance happy

http://www.ebay.com/itm/Userportweiche-dreifach-von-Scanntronnik-for-Commodore-C64-fabrikneu/322152742753?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D37252%26meid%3D3eb4f2a7736349e7a141a0f563da8760%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D322152751588

Posted By

gerliczer
on 2016-06-22
01:38:56
 Re: C64 User port expander: may it work with Plussy?

Make a small board that translates the layout, and you are good to go.



Back to topReply to this topic


Copyright © Plus/4 World Team, 2001-2024