Posted By
icbrkr
on 2014-10-29
19:05:21
|  Re: general smooth scrolling questions
Thanks for the suggestions.
I might have cut and pasted something wrong (I was doing a lot of code tweaking), but HorizPos's default value is $E0, which would set bit 6 high on $FF07. If I'm reading this right, it would set it to NTSC and turn off smooth scrolling (which is then turned back on with $58, NTSC on, and the 3 lower bits set to high).
Luca: let me do some checking. I didn't write the original code, but I did notice that $ff1e was the horizontal register, not the vertical but it still seemed to work in PAL. Let's see what I can do with $ff1d instead.
|
