Posted By
MMS
on 2014-08-18
19:36:34
 |  Re: Failing C16 Power Supply, what to look out for...
Currently I use my ZX Spectrum 48K with a third party 1.2A selectable voltage and polarity PSU (I bought it without PSU as "bad/for part" for 3€ together with tapes and free Kempston Interface. PSU cost me at an action further 4€. Check the 48K Speccy price...).
Works everything fine, except the famous ZX Printer, maybe due to power, or it is all dead, but I cannot test it further.
As far as I know, C16 may work with any unregulated power supply with th 9V, higher amp is the better. I think my adapter may also work, but has no C16 to test. May send some details, if you need. No noise at all 
|
