Posted By
Csabo
on 2014-08-11
08:41:43
|  Re: SD2IEC SID Player
Actually SID files don't have a load address, the first four bytes must be "PSID". If you check in a hex editor, or use the DOS TYPE command to "list" the file, you should see that.
So, you grab DirMaster, put some SID files on a new disk image, save and run. Works like a charm!
I guess this is an indirect feature request for Epy: when the file is being loaded, check if there's two extra bytes at the front, then followed by "PSID" (which is what Litwr seems to have done). In that case, drop the first two bytes. (The additional requests are: figure out how to load regardless of the file type, detect if there's no disk in the drive, etc.  )
|
