Posted By
Chicken on 2010-09-17 10:27:21
| Re: SID-card scheme?
The 3.96mm female edge (user port) connector is still available at various online shops.
The problem is the 1.98mm female edge one which would be required for a pass through port. (The male edge will be on the SID-Card PCB.)
I checked various companies, including http://www.cambridgeconnectors.com/CC/CC_Edgecard.html (they are also the European distributor for Sullins Electronics). But none of them has a 1.98mm female edge connector. Except a bi-level one -p. 56 in the Sullins catalog- but even if they had a 25 contacts version, it still wouldn't work :/)
Nevertheless, a pass through port with 2.54mm spacing would be the next best choice because Solder used this for various projects.
|