Posted By
Ken
on 2018-02-18
20:01:13
|  Re: universal cartridge quick guide
JamesC ok I see what you are saying
and no the board is not set to handle 1 program on the bank low rom (1) location and a 2nd different program on the bank hi rom (2) location
you would need to put both programs on the same eprom at the rom low (1) location and use the dipswitch to select the program you wanted
but what you are saying is possible with a few trace cuts and some Frankenstein wires added 
then all that would happen is you would select rom 1 or rom 2 with a switch
MMS thank you
about converting games to crt , I am not a coder, and would have no clue where to Begin
I am 100% strictly only hardware
|
