Posted By
Andras78
on 2010-02-06
06:21:03
|  1531 Datasette loading problem
Hi experts,
I have bought a cplus4 machine and a 1531 Datasette, and it is looks fine, start playing after 'LOAD', 'PRESS PLAY ON TAPE', etc.
I have lot of casettes with programs, but none of them are loading perfectly the tape does not find the program's header, anything.
I modified the 'screw' on tape from the beginning to the end (it is almost unscrewed totally  ), but neither was the correct settings.
Anybody has a similar problem? Or should I have to try another thing? Do I need to set something else?
Thanks in advance.
Andras
|
|
Posted By
Litwr
on 2010-02-09
01:25:21
| Re: 1531 Datasette loading problem
I used my ears and screwdriver applied to the datasette head...
|
|
Posted By
Jakec
on 2010-02-09
08:09:47
| Re: 1531 Datasette loading problem
I read somewhere the head setup program. I do not know where... . 
http://www.zimmers.net/anonftp/pub/cbm/schematics/datassette/
|
|
Posted By
Andras78
on 2010-02-09
08:24:06
| Re: 1531 Datasette loading problem
Litwr: i used my ears too, but there was not any noise :D . it can be possible to hear the noise via the datasette? i did not know it
Jakec: really thanks the link, im looking it deeply :-?
|
|
Posted By
gerliczer
on 2010-02-09
09:12:20
| Re: 1531 Datasette loading problem
András!
Read the post and the previous conversation at the following link: http://forum.index.hu/Article/viewArticle?a=94078960&t=9006036. Maybe it helps.
|
|
Posted By
Andras78
on 2010-02-09
15:27:26
| Re: 1531 Datasette loading problem
gerliczer: thanks a lot!!
|
|
Posted By
Litwr
on 2010-02-11
08:18:22
| Re: 1531 Datasette loading problem
I used wire with 5-10 KOhm register between Audio/video pin 3 (sound, fb6) and cassette pin 4 (cst rd, fb11). This small soldering (inside +4) sends tape sound to tv, etc... It was very usable for me.
|
|
