 Previous Messages |
Posted By
George
on 2021-07-22
15:31:41
 |  Re: madpascal and plus4 rs232
Hi Spieler
can you describe the settings in Vice and Tera Term? I want to try this out..
|
|
Posted By
spieler
on 2021-04-03
10:39:06
| Re: madpascal and plus4 rs232
send from tera-term to plus4 eee..qqq
and ABCDE....send from plus4 to teraterm
// ACIA DATA = $fd00;
// ACIA STATUS = $fd01;
// ACIA COMMAND = $fd02;
// ACIA CONTROL = $fd03;
program seriel;
const
EMPTY = $20;
SCREEN_ADDR = $0c00;
var
i,y : byte;
procedure seriell_send_empfang(); assembler;
asm {
cli
lda #$09
sta $fd02
lda #$1e
sta $fd03
lda $fd
sta $fd00
check:
lda $fd01
and #$10
beq check
lda $fd00
sta $fc
};
end;
begin
FillChar(pointer(SCREEN_ADDR), 24 * 40, EMPTY);
i:=65;
y:=0;
while True do begin
pause(20);
i:=i+1;
if i=91 then begin
i:=65;
end;
poke($fd,i);
seriell_send_empfang();
y:=y+1;
if y=40 then begin
y:=0;
FillChar(pointer(SCREEN_ADDR), 24 * 40, EMPTY);
end;
poke($c00+y,peek($fc)-96);
end;
end.
|
|
Posted By
Csabo
on 2021-04-03
09:02:33
| Re: madpascal and plus4 rs232
Spiler, I assume this is the picture you tried to upload:
(Sorry I didn't see your question here, I answered the same question in the "Let's Play" thread.) As a guest, the simplest thing to do is post your picture or imgur.com or some similar service, the post the link here.
|
|
Posted By
spieler
on 2021-04-03
07:44:03
| Re: madpascal and plus4 rs232
serial send_receiving :
------------------------------
// ACIA DATA = $fd00;
// ACIA STATUS = $fd01;
// ACIA COMMAND = $fd02;
// ACIA CONTROL = $fd03;
program seriel;
var
i,y : byte;
procedure seriell_send_empfang(); assembler;
asm {
cli
lda #$09
sta $fd02
lda #$1e
sta $fd03
lda $fd
sta $fd00
check:
lda $fd01
and #$10
beq check
lda $fd00
sta $fc
};
end;
begin
i:=65;
while True do begin
pause(10);
poke($fd,i); // adresse $fd = send_data
seriell_send_empfang();
poke($c00,peek($fc)-96); // adresse $fc = empfang_data
i:=i+1;
if i=91 then begin
i:=65;
end;
end;
end.
---------------------------------
|
|
Posted By
seff
on 2021-04-03
07:16:18
 | Re: madpascal and plus4 rs232
@spieler
To upload a picture, you need to first go to:
features
and then select:
Upload an image to be posted on the forum, then use the HTML link provided and embed it in your post.
|
|
Posted By
spieler
on 2021-04-03
07:11:39
| Re: madpascal and plus4 rs232
Hi good afternoon.
with serial sending / receiving, it is easier to direct
about the ACIA. There are no open and close.
See demo.
greeting
----------------------------------
// KERNAL_SETLFS = $FFBA;
// KERNAL_SETNAM = $FFBD;
// KERNAL_OPEN = $FFC0;
// KERNAL_CLOSE = $FFC3;
// KERNAL_CHKIN = $FFC6;
// KERNAL_CHKOUT = $FFC9;
// KERNAL_CLRCHN = $FFCC;
// KERNAL_CHRIN = $FFCF;
// KERNAL_CHROUT = $FFD2;
// KERNAL_LOAD = $FFD5;
// KERNAL_READST = $FE07;
// ACIA DATA = $fd00;
// ACIA STATUS = $fd01;
// ACIA COMMAND = $fd02;
// ACIA CONTROL = $fd03;
program seriel;
const
EMPTY = $20;
SCREEN_ADDR = $0c00;
var
i,y : byte;
procedure seriell_send(); assembler;
asm {
cli
lda #$09
sta $fd02
lda #$1e
sta $fd03
lda #66
sta $fd00
};
end;
procedure seriell_empfang(); assembler;
asm {
cli
lda #$09
sta $fd02
lda #$1e
sta $fd03
lda $fd00
sta $fc
};
end;
begin
while True do begin
pause(10);
seriell_empfang();
poke($c00+i,peek($fc)-96);
i:=i+1;
if i=80 then begin
i:=0;
FillChar(pointer(SCREEN_ADDR), 24 * 40, EMPTY);
end;
end;
end.
----------------------------------
|
|
Posted By
spieler
on 2021-04-02
11:00:41
| Re: madpascal and plus4 rs232
how can you put a picture in here in the forum?
i'm from germany, my text here is probably poorly translated.
|
|
Posted By
spieler
on 2021-04-02
10:58:41
| Re: madpascal and plus4 rs232
ff4e > getin
fetch characters from rs232
if something is to be received, acia always has to
contact to the remote station exist then they come
data on the plus4
|
|
Posted By
gerliczer
on 2021-04-02
10:34:35
| Re: madpascal and plus4 rs232
Without putting in too much effort understanding what your program does, here are two questions. What should be at memory address $FE as it is seemingly uninitialized? What does the routine at $FFE4 do since you didn't list it as a known KERNAL vector?
|
|
Posted By
spieler
on 2021-04-02
10:18:45
| madpascal and plus4 rs232
I tried to send serial data at 9600baud with madpascal. it also works from tera term to plus4. I just can't make the ASCII characters the way I want them to.
some don't fit.
where can you put a picture in here?
greeting
---------------------------------
// KERNAL_SETLFS = $FFBA;
// KERNAL_SETNAM = $FFBD;
// KERNAL_OPEN = $FFC0;
// KERNAL_CLOSE = $FFC3;
// KERNAL_CHKIN = $FFC6;
// KERNAL_CHKOUT = $FFC9;
// KERNAL_CLRCHN = $FFCC;
// KERNAL_CHRIN = $FFCF;
// KERNAL_CHROUT = $FFD2;
// KERNAL_LOAD = $FFD5;
// KERNAL_READST = $FE07;
program seriel;
const
EMPTY = $20;
SCREEN_ADDR = $0c00;
var
i,y : byte;
procedure seriell_open(); assembler;
asm {
lda #1
ldx #2
ldy #2
jsr $ffba
lda #2
ldy #$fc
ldx #$fd
jsr $ffbd
jsr $ffc0
};
end;
procedure seriell_send(); assembler;
asm {
ldx #1
jsr $ffc9
lda $fe
jsr $ffd2
};
end;
procedure seriell_empfang(); assembler;
asm {
ldx #1
jsr $ffc6
jsr $ffe4
sta $ff
};
end;
procedure seriell_close(); assembler;
asm {
lda #$01
jsr $ffc3
};
end;
begin
FillChar(pointer(SCREEN_ADDR), 24 * 40, EMPTY);
seriell_open;
pause(10);
i:=0;
while True do begin
pause;
seriell_send();
seriell_empfang();
y:=peek($ff);
poke($c00+i,peek($ff)-96);
i:=i+1;
if i=80 then begin
i:=0;
FillChar(pointer(SCREEN_ADDR), 24 * 40, EMPTY);
end;
end;
seriell_close;
end.
----------------------------------------
|
|
