Post - Forum - Plus/4 World



	Home Search Games Tapes Covers Cheats Maps Software New Stuff Hall Of Fame HVTC Game Endings Solutions Remakes Publications Magazines Effects Top List Members Groups Features Plus/4 Encyclopedia Hardware Tools Options Forum Home Search Games Tapes Covers Cheats Maps Software New Stuff Hall Of Fame HVTC Game Endings Solutions Remakes Publications Magazines Effects Top List Members Groups Features Plus/4 Encyclopedia Hardware Tools Options Forum	Login

Forum Help

Post Your Message

Previous Messages

Posted By

NinjaDRM
on 2007-04-15
19:58:13

Re: FLD on +4?

Thanks for the replies :D

I know that my c64-knowledge cannot be transferred 1:1 to the plus4. Still, it is the only approach I have so far

(Especially when lacking the real thing right now)

But what do I see when preventing the DMA in textmode using $ff06? The option of flipping the screen sounds nice, but an "idle-display" byte would be most useful for my problem. Maybe "A Trip" can help me...

Posted By

Gaia
on 2007-04-15
12:34:58

Re: FLD on +4?

Oops, the DMA story could fill a whole book

As a rule of thumb: do not rely too much on your knowledge of the C64 as although the basic mechanism is very similar, there are subtle differences between the two machines. For a few ideas of FLD on the plus/4, you can check a couple of demos that were basically converted from C64 (like A Trip for example).

FLD is also depending on whether you are using text or bitmap mode. FF1A/B does not play a role in text mode (unless you're messing with the cursor). If you delay the first "bad line" (aka DMA line) by appropriately changing the lowest 3 bits of FF06 not to be equal to that of FF1C/D, you are basically doing an FLD. You can do the same in bitmap mode by not allowing the lowest 3 bits of FF1F to be 7 (the vertical sub address, increasing every non idle TED rasterline).

Posted By

Degauss
on 2007-04-15
06:29:44

Re: FLD on +4?

correct me if i'm wrong:

i noticed that $ff06 is triggering the DMA-cycle, while $ff1f is responsible for adding 40 to the read-cursor ($ff1a/1b aswell as the read-cursor for the DMA-cycle). to go safe, you have to modify both.

a "standard" +4-technique is to do this:
-modify $ff06 to circumvent the DMA-cycle
-modify $ff1f/1a/1b to display the line you want

this has more overhead but it's more powerful at the same time since you can flip a whole screen (which is not possible with *real* FLD)

Posted By

NinjaDRM
on 2007-04-15
05:45:11

FLD on +4?

Greetings all,

I got a question which I can't solve myself, as my real +4 is 8000km away

I wanted to do a FLD like i know them from the c64, that is: get $ff1d, process the lower three bits and write to $ff06. On a c64, then the last byte of the current videobank gets displayed in the character area.

But just having Forever+4, VICE and YAPE here, they give me all different results. VICE displays what I would see on a c64. The other two give me colorful garbage. I assume that YAPE is correct? Is there a way to get an idle-state-display (perhaps using $ff1f)?