 Previous Messages |
Posted By
Litwr
on 2003-11-25
|  Re: User port printers
It's very easy to connect any Centronics printer directly to +4 user port. I connected my +4 to printer with self-made cable. See my site litwr.boom.ru/eng.html +4 emulator 'info' section fo details. I had no problem to print texts from 3+1 Editor or Basic and 320x200 bw graphics (160x200 mc graphics was not supported).
|
|
Posted By
bszggg
on 2003-11-19
| Re: User port printers
nekem van olyan könyvem, amibe le van írva magyarul, hogy lehet rákötni az user port-ra egy centronics nyomtatót. ez használja a 8bit-es párhuzamos portot, és vezérlőjeleknek 2 vezetéket az acia-ról. van hozzá szoftver is megírva gépi kódba.
http://amigos.amiga.hu/plus4/plus4/centronics.htm
Itt van, mert már be is scanneltem egy ideje. 
|
|
Posted By
JamesC
on 2003-11-18
| Re: User port printers
Here's a printer adapter that uses the serial and cassette ports:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3059806178&category=3544
Here's one that uses the user port:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3441223445&category=1246
Just for novelty, here's a Commodore color printer in Australia:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3059796072&category=3543
...which is the same as this printer sold in the States:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2766700489&category=4193
|
|
Posted By
JamesC
on 2003-11-18
| Re: User port printers
Not to my knowledge. 3+1 presumes that you're interfacing through the serial port. Script/Plus can be told to print to other types of printers though, maybe one of those will go through the user port.
By the time the Plus/4 came about, many printer manufacturers were supporting interfacing through the serial port... it was not difficult to find a Star or Okidata or other non-Commodore printer that used the serial port.
If you're wondering about the demand for printing to the user port for a program you're writing, I've already asked Csabo to poll users here. Of the approx 45% that actually own a printer, very few have a non-Commodore printer to start with, let alone one that goes through the user port. (Csabo, is there a way to view old polls?)
|
|
Posted By
Crown
on 2003-11-17
| Re: User port printers
Is there any software available which supports Centronics printers through such an adapter?
|
|
Posted By
JamesC
on 2003-11-17
| Re: User port printers
Here in the States, printer adapters were available to allow Centronics-type printers to hook up to the Commodore user port. Most had a switch that you could flip if you were on a Plus/4. However they usually pulled their power from the cassette port.
|
|
Posted By
Ulysses777
on 2003-11-17
| Re: User port printers
The only one I know of that connects to the user port is the Geocable, which was designed to run on C64 GEOS. I don't know if the Plus4 version of GEOS supports it.
|
|
Posted By
Crown
on 2003-11-17
| User port printers
Does anyone know, whether there was any printer or hardware modifications/software available for the plus4 which were able to use a printer connected to the user port like Centronics printers?
|
|
