 Previous Messages |
Posted By
bszggg
on 2024-03-09
12:52:30
|  Re: d64 to floppy with sd2iec
Nice options..
Thanks the answers!
I copied the .d64 to SD card, and I navigate into the .d64 file in sd2iec with the fb16.
Hopefully I need one file from d64, so I can copy out with CBM-Command
Is there a disc copier program that can use inside a d64 file from sd2iec (U8) to an 1551 (U9)?
If yes, maybe I don't have to buy anything to it..
|
|
Posted By
Lacus
on 2024-03-09
08:27:49
| Re: d64 to floppy with sd2iec
I can recommed this: https://www.luigidifraia.com/hardware/#IECHost
Very fast!
|
|
Posted By
gerliczer
on 2024-03-05
05:05:33
| Re: d64 to floppy with sd2iec
If you happen to have at least one C64 in working condition at hand, you could use SDBrowse. It is available on CSDb. I found some posts here in the forum about porting it to our machines but that's all. Seemingly the effort quietly died.
|
|
Posted By
SukkoPera
on 2024-03-05
05:32:25
| Re: d64 to floppy with sd2iec
Yes, I agree that ZoomFloppy is the easiest way. I can send you a PCB that you can build yourself if you want.
For full flexibility though (copy-protected disks) you must install a parallel port inside your 1541 (or use a 1571).
|
|
Posted By
Harry Potter
on 2024-03-04
19:11:41
| Re: d64 to floppy with sd2iec
Well...I used to use a Zoomfloppy and the OpenCBM program to transfer .d64's to real floppies. The reasons I stopped were because my Commodores are currently not set up, and my Zoomfloppy is missing. Try them out!
|
|
Posted By
bszggg
on 2024-03-04
16:39:43
| d64 to floppy with sd2iec
Hi!
What is the best options if I would like to write out a d64 file to a real floppy disk?
I have sd2iec, and sd card with the d64 file(s), and I have +4 and floppy (1551, 1541 too)
What program should I use?
|
|
