Posted By
DeadTED
on 2000-05-05
|  Using a Cannon BJC centronics printer using Script+ on +4
1. You must make a centronics cable from the user port to the printer or buy one from
http://members.tripod.de/solder/index.html
I bought one because Solder sends a userport driver software with it.
2. Load the centronics(ascii version) user port software discussed above
3. load script plus
4. select number 3 for the printer
5. select (s) for serial connection
and that's it
To print program listings to the printer it's real easy.
1. do steps 1 and 2 above
2. load the program you wish to print
3. type the following
- open 1,4 hit return
- cmd 1 hit return
- list hit return
Almost immediately the output is redirected from the screem to the printer.
|
