Posted By
crock
on 2013-03-06
09:13:08
 |  Re: Ports of C=116 (RAM/SidCard?)
Try this: http://mcbx.netne.net/hacks/c16_64k/index.htm
This is the instructions for a C16. The chip labels (U5,U6 etc) are the same on a C116 but the location on the board, and thus the points to solder to, will likely be different. I've never followed it but it sounds reasonable *if* you have some experience with soldering. I can check this tonight if you need me to.
I would also say the for the sake of a few dollars - use a solder sucker and/or desoldering braid instead of needles to remove the original chips and clean the pcb holes.
Rob
|
