Posted By
MMS
on 2012-02-22
10:51:52
 |  Re: HELP
You may check the standard CVBS video output, connecting to TV Yellow/White/Red AV In port.This signal do not "suffer" several transcoding by the modulatiorn, and in fact it is sharper than RF too.
You may need a Video 8-pol Din connector (DIN45326 or DIN41524, tha later is perfect, the more typical first need a hack: uou should cut out pins 7 and 8, but they are not used at all)
Pin 4 is Composit video
Pin 3 is Audio out
and you may work out an Svideo connection too, but it was told to be worse than CVBS, (so forget it, more wire for worse picture quality...)
In case you were able to connect audio out at least to an amplifier, you may try a SOUND command too. At least you will now, if the CPU works, if sound comes out.
Sorry, Hungarian, but you may find the pin layout here:
http://www.machines.hu/cgi-bin/machines/new/cikk.cgi?cikk=329&oldal=1&pda=&noimg=
PS: I have 2 similar machines... But I do not hurt them, give to someone who may use them as IC source.
|
